正河源 DAT/ER立銑刀夾頭，SYIC DAT40-ER25-100

科研综合服务平台

常用商品分类

分类纠错

货号：SYIC DAT40-ER25-100

品牌：CHAIN HEADWAY/正河源

计量单位：个

交货周期

：30

选择规格： SYIC DAT40-ER25-100 SYIC DAT40-ER25-200 SYIC DAT40-ER25-150 SYIC DAT40-ER25-70 SYIC DAT40-ER25-180

运杂费：登录后可查看运杂费

服务电话(移)：17319309550

DeepBio得分:5567.2

DeepBio得分是基于文献引用次数，影响因子，文献新近度等因素计算的客观产品评级，得分越高表明该产品经过越可靠的实验验证，质量可信度越高

产品详情

产品特点 Features

筒夾樣式有彈性、止水、剛性攻牙、伸縮攻牙、極小內孔、燒結式熱膨脹可供選擇
彈性筒夾偏擺精度有標準級（0.02mm以內）.A級（0.01mm以內）.UP（0.005mm以内）
螺帽預設動平衡設計，可在RPM10，000下使用
整支通孔·利於出水及抗震
如需擋刀螺絲可另外指定
裝置時筒夾必須先置入螺帽，再裝入刀具，接著鎖固入本體
刀具置入筒夾內孔，必須超出筒夾內孔有效夾持長度，避免不當鎖固造成損壞
務必使用正確扳手來裝置不可任意改變，避免不當鎖固，造成損壞
There are various features for collet, like flexibility, water sealed, rigid tapping, extend tapping, minimized inner hole, shrink-fitting for your selection.
The ER collet has three kinds of classes for precision: general class 0.02mm,A class 0.01 mm, and UP class 0.05mm.
The pre-balance can reach 10000rpm.
The tool holder is through-hole, whichis better for watertoget through and vibration resistance.
Additional selection if stop screwis needed.
When using, please put the collet into the nut and then put them into the body together.
It must exceed the effective clamping length of collet when inserting the cutter into collet to avoid the improper lock& damage.
please use the right wrench oninstallation to avoid the improper lockand damage.

技术参数 Specifications

细节.jpg 参数.jpg 参数2.jpg

选型指南 SelectionData

配.jpg

产品细节 Details

细节1.jpg

好评度	商品满意度	服务满意度	发货满意度